Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. S197 Mustang GT (2011-2014)
    As the title says. 8.8 diff. All solid mounts. Blew up the original diff, had it replaced with strange 35 spline alloy, s-trac, 3.73 ford racing gears and c clip eliminators. All is fine for about 400 miles. All of the sudden I get a LOUD clunk when engaging the clutch hard, doesn't matter the...
  2. Drivetrain Parts
    Superior Axle & Gear Evolution Series Hardened 28 Spline 4-Lug Axles Fox Length P/N "EV81-28" New in box, never installed. $210 shipped to the lower 48. PM me for fastest response. Thanks
  3. Drivetrain Parts
    Good used T5 10 spline input shaft with bearing on it. Bearing spins good, came out of a working trans. $55 shipped Everything below is NEW still in the boxes.... 2 Oem Ford diff spider shafts One box has just the cross shaft The other box has shaft, retaining bolt, and 2 c-clips Both are in...
  4. Drivetrain Parts
    Brand New Ford 3.55 gears..comes with ring and pinion, crush sleeve, shims and new nut - $120 shipped .....SOLD Brand New Ford Racing 31 spline carrier - I should also have new c-clips I'll throw in $200 Shipped.....SOLD Rear diff bushing TOOL New Never used $30......SOLD Used but good...
  5. Drivetrain Parts
    I bent one of my Superior 31 spline axles (not superior huh?) and Id like to pick up another if anyone has one. Doesnt have to be superior brand, can be strange, moser, yukon, etc since I don't mind mismatching.
  6. Drivetrain Parts
    Selling a 31 spline axle housing. Purchased it for an upgrade 3 years ago; been sitting on shelf in an enclosed plastic bag since then. I was told that it was used only as a mock-up. It's extremely clean and doesn't seem to show any wear. Can't remember manufacturer. $200 shipped +3% paypal...
  7. Suspension
    I have a brand new Strange Engineering P3108 axle/c-clip elim/1/2" stud package for sale that we need to get rid of. We ordered this kit for a customer but he decided to go with Big Ford housing ends instead. *31 spline *1/2"-20 x 3" *5 x 4.5" bolt pattern. *Fits 79-93 Mustangs with stock 8.8...
  8. Drivetrain Parts
    Selling a set of 31 Spline Moser Axles. These are 4-lug and come with C-Clip Eliminators. The studs will need to be replace as a couple are missing. Otherwise, these are in good condition and the splines look good. Will try to post pics soon. For now, PM for pictures. $250 shipped. PayPal...
  9. Drivetrain Parts
    2003 Mach 1 rear axle 57k miles sand blasted and sealed will be painted black in a few days, with brakes and new rotors $850
  10. Drivetrain Parts
    i have a set of 31 spline 4 lug fox length strange axles for a 8.8 that has a 31 spline auburn locker or limited slip. has strange c clip eliminators pressed on with studs installed w/ nuts. has 3450 miles on em and i went 5 lug and these puppies r just in my way now. i dnt have a pic currently...
  11. Drag Racing
    I broke my stock axle last year after my rev limiter did not hold my RPM. I ran it fine all year launching at 3600 rpm. Now I have an option for 31 spline strange axles and an aftermarket diff. Is this going to hold a 450hp, 4000-5000 RPM launch on Drag Radials in a 2980# car with driver?
  12. General Mustang Tech
    If I am using Mach1 rear disc setup, do I need to use sn95 cobra caliper brackets? I will be using sn95 axles.
  13. Drivetrain Parts
    We are an authorized distributor for Moser Engineering. We will beat any quote on Moser Products..GAURANTEED!!! Two day turn around on most orders. Axles, spools, c-clip eliminators, bearing kits...we have it all. Send us a pm today for a differential package that will hold up to the demanding...
  14. Drivetrain Parts
    We have a few brand new 1994-2004 Mustang axle shafts available for just $149.99/pair while supplies last!!!
  15. Drivetrain Parts
    anyone have some stock axles for a 03 cobra??? I have one with a broken shaft. I do not race so it does not need to be something wild. stock will do! Thanks
1-15 of 15 Results