Search Results for ‘arp’

Selling complete package to upgrade your rear wheel studs. Everything is brand new. ARP Wheel studs 100-7703 - $45 ea. 75W-90 rear gear oil - $18 ea. MMWS4 wheel spacers - $100 Motorcraft XL-3 friction modifier - $11 Rear end gasket - $15 Permatex the right stuff - $20 Total new is ~$272...

ARP Ring Compressor 4.030" 900-0300 https://photos.app.goo.gl/QAJsPGKS3ZQ5fSnE6 This is a brand new, never-used tool. I bought it new in early 2003 for a project that never materialized. I'm selling all of the parts -- all new -- for a 408 small block Ford build, plus some tools and Fox...

Fresh 302 punched .030, out of an early 93 Thunderbird put together but never ran. Motor was being setup for a Ranger. Potential horsepower according to Ford Racing techs 450-500HP -Ford Motorsports x303 heads M-6049-X303 -Ford Motorsports gaskets (Head, Valve, Timing) -Ford Motorsports...

New set of ARP flywheel bolts, taken out of package but never used or even threaded into anything. Fits Ford or Chevy PN# 200-2802 See link for price and fitment $20 plus shipping from Summit Only asking $20 With Shipping, Shipped to your door https://www.summitracing.com/parts/arp-200-2802

Back up for sale is a brand new set of ARP 2000 rod bolts. Part number 256-6301 for Ford Modular 4.6 and 5.4. Please make sure the part number is for your vehicle. These were sold but found out( both buyer and seller) that these do NOT fit 03/04 cobra Manley rods. Please note these are brand...

For sale is a set of ARP Main cap studs, part number 154-5407. They are barely used. $30 plus shipping and paypal. text me at 985-285-0901 for a fast response. Below is the write up from summit: Make: FORD Beginning Year: 1968 Ending Year: 2001 Liter: 5.0 CID: 302 Engine Type...

2000 rod bolts Back up for sale is a brand new set of ARP 2000 rod bolts. Part number 256-6301 for Ford Modular 4.6 and 5.4. Please make sure the part number is for your vehicle. These were sold but found out( both buyer and seller) that these do NOT fit 03/04 cobra Manley rods. Please note...

ABack up for sale is a brand new set of ARP 2000 rod bolts. Part number 256-6301 for Ford Modular 4.6 and 5.4. Please make sure the part number is for your vehicle. These were sold but found out( both buyer and seller) that these do NOT fit 03/04 cobra Manley rods. Please note these are brand...

SOLD!

I have a brand new in the packaging arp oil pump driveshaft for a sbf ford 302. It was taken out of the packaging but never installed. I'm switching over to a 351w and didn't realize the shaft was bigger on the 351. So if anyone has a 351w shaft they would like to trade for a 302 let me know...

Have a brand new set of ARP main studs for 03/04 cobra 100.00 shipped

SOLD!

*I have a set of ARP head studs for 2v & 4v modular engines, box has not been opened $300 shipped that also includes Paypal fees...

I have 1996 351w roller engine forsale. The block was bored 30 over, cooked, cleaned, and decked. Polished crank, New Stock style pistons, with coated skirts and chromoly rings. Stock camshaft. New oil pump and timing chain set. I have rebuilt gt40 heads on it. Heads were cleaned and decked...

ARP 7/16 Rocker Arms Studs with low miles on them- SOLD Pics: Uploaded with ImageShack.us Uploaded with ImageShack.us AFR-8020 Inner Blue Stripped Valve Springs with low miles on them- $40 Specs: 1.437 OD, .720 ID, 120# @1.800, 300# @ 1.250, Chrome Silicon, 1.090 Coil Bind, 325 Spring...

I recently purchased a Summit Racing Double Roller Timing Set Summit Racing SUM-G6651-B - Summit Racing Street & Strip® Timing Sets - Overview - SummitRacing.com and was wondering is a fuel pump eccentric needed???? Reason I as is because on summit in the notes is says "With 2 piece fuel pump...

ARP 154-3604 Cylinder Head Bolts, High Performance, Hex Head, Ford, 351C, 351M, 400, Kit Used once... I really don't think there is even a scratch on them; will need to relook. Can send pics upon request. $65 will get them to you... Fees and Shipping included!! Thank you. 214.206.6384

All of these parts are used and have been taken off of my 2001 GT (they are all in good working condition) BBK 75mm throttle body-150.00 ARP 6 point head studs-150.00 BBK equal length shorty headers-250.00 Fox Lake Racing Products P-51 intake manifold- $550.00 SPEC CLUTCH Billet aluminum...

Looking to buy a set of head studs for my stock GT40 cobra heads. 7/16. would prefer ARP. just looking to see if someone has a set laying around they are looking to get rid of. let me know what you have!! Thanks, Rob

For sale: 306 rotating assembly, good condition with low miles. Forged L2482 +.030" flat top pistons cut for 2.05" valve, mounted on reconditioned stock rods with ARP bolts & factory crank. Car was sold, I'm parted out what is left. $200 obo + shipping. Paypal is OK & I'll eat the fees.