Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 67 Results
  1. GT & SOHC
    I understand that the timing cover won't match up and i need to drill a coolant passage on the driver side, but what else would need to be done?:confused: Thanks, Steve
  2. Rims Wheels and Tires
    Selling my BBS RX 17x9 wheels. They were my race rims and were great! Unfortunately, I upgraded to the Brembo 2000 Cobra R calipers and these rims do not clear them without a .5-.75 inch spacer (no thanks). $850 + shipping OBO These wheels are no longer made by BBS. When they were, they were...
  3. Windsor Engine Parts
    Selling my aluminum TFS high port heads. They have 2.08/1.60 valves and have zero miles since returning from the machine shop. These are the older castings so no worry of cracking between the valves. The heads have new springs (good to .650 hyd roller) and locks along with a fresh valve job...
  4. Modular Engine Parts
    EDIT: Will sell everything together as a package for $600. Complete assembled Cobra B Heads and Cobra Crank added -Standard Bore Teksid Aluminum Block out of a 1993 Lincoln Mark VIII that is in great condition. The block is bare and includes the main caps. The casting number is F2LE 6015 AG...
  5. General Mustang Tech
    It looks like the only difference between the FMS Driveshaft for a 79-95, and a 96-04 is the yoke being 28 spline vs 31 spline. Am I correct in assuming you could run the 96-04 driveshaft in a fox or a 94-95 with a TKO (31 spline output shaft), or swap yokes and run the 96-04 in a 79-95, or vice...
  6. Windsor Engine Parts
    Just removed a RAM alum. flywheel from my SBF, it's a 28 oz. balance and 157 tooth. Great condition, no broken teeth, 7 years old, between 15-20000 miles. $225 plus shipping.
  7. Drivetrain Parts
    Just removed a RAM alum. flywheel from my SBF, it's a 28 oz. balance and 157 tooth. Great condition, no broken teeth, 7 years old, between 15-20000 miles. $225 plus shipping.
  8. Suspension
    SOLD! Pair of TCE Performance front aluminum brake rotor hats. Rotors are used up. Hardware included. These are the TCE "Corner Carver" aluminum rotor hats that were developed as a replacement for 13" front Cobra rotors for 94-04 Mustang Cobras and other Fox/SN95 cars with Cobra front brakes...
  9. Windsor Engine Parts
    WTT or Sale: Two sets of ported older high port alum. heads. (1)First set has 2.08/1.60 valves but no springs/hardware. They are o-ringed and have been ported prior to my purchasing. These are 60cc heads and I have yet to run them due to purchasing them thinking they were 68cc versions. (2)...
  10. S197 and Coyote Parts
    96-99 teskid aluminum block. Strongest aluminum factory Ford block. Block is all original with no machining. Looks to have some miles on it. After some boreing, honeing and clean up it would be like new again. Price dropped to $200 plus shipping.
  11. Modular Engine Parts
    Looking for a replacement for my 2007 GT block. I already have a Teksid block but would not only have the same block my car came with. But I think it will be cheaper in the end anyway.
  12. Drivetrain Parts
    hey guys. up for sale is an entire clutch assembly i bought when i picked up a used tranny. to be honest i dont know the milage on these parts but theyre in good shape. the origional owner sold me everything he had bc he was going with an auto. i was gunna use the flywheel but i decided i...
  13. Windsor Engine Parts
    SOLD ••••► ♠ Holley SysteMAX Aluminum Cylinder Heads ~ Mustang Foxbody 87-95 Ford 5.0L 302 H.O. EFI ♠ BRAND NEW ~ Zero Miles! ~ Price lowered to sell!! ~ $ 975 shipped Cylinder Head Style: Assembled Cylinder Head Material: Aluminum Cylinder Head Finish: Natural Combustion Chamber Volume...
  14. Windsor Engine Parts
    Be Cool aluminum 2-row radiator for 79-93 Mustang. More info: with 13 psi Be Cool aluminum radiator cap: This set up is around $550 and has never had any water or coolant run through it. It was used for...
  15. Windsor Engine Parts
    Set of Anderson Ford Motorsport polished cast alum valve covers for sale. Breathers included. $65 shipped. PM for contact info. Thanks Lee.
  16. Windsor Engine Parts
    The friggin parts stores don't keep H.D. rads in stock anymore and will take days to order! :mad: Hoping someone local to this area may have an aluminum or heady duty 2 or 3-row in great shape for sale. Need to get my newly aquired 91 GT rolling soon! Can't use a standard stocker because I...
  17. Modular Engine Parts
    NO REASONABLE OFFER REFUSED Engine is out of a 2002 explorer so the block is aluminum. Approx 36,000 miles on it, has a slight tap that goes away when the engine warms up (possible wrist pin, not interested in tearing it down to find out). Never starved for oil, never any metal in the pan. I...
41-60 of 67 Results