Ford Mustang Forums banner
aluminum
1-20 of 65 Results
  1. Drivetrain Parts
    I have a nice lightly used aluminum driveshaft out of a fox body with a TKO600/8.8 diff for sale. $150 OBO.
  2. Drivetrain Parts
    Selling a ford racing aluminum driveshaft with 28 spline yoke. Asking $165. Ford Racing Aluminum Driveshaft '79 to '95 Mustang | eBay
  3. Drivetrain Parts
    '79 to '95 Fox Mustang Aluminum Driveshaft Selling the aluminum driveshaft shown in the pictures. Measures 45.5" center to center in length and has a t5 yoke. Also have it listed on ebay for $180 but will knock some off for Corral users, make an offer. '79 to '95 Fox Mustang Aluminum...
  4. Modular Engine Parts
    Aluminum flywheel for Ford 4.6L 4v Cobra engines. Will fit 4.6L 3V and 5.0L TiVCT with non-production clutch - Was briefly installed but in like-new condition. Reduced Price: $150 shipped (local sale available in Ann Arbor / Detroit area) PM or email [email protected] Thanks. Specs...
  5. Windsor Engine Parts
    Selling the heads shown in the picture. Casting number is 3038 and stamp says J-12007 383W-435. Both of these were damaged from a blown head gasket on one cylinder each due to bad ignition timing. The blow out is on the outer edge of the head (exhaust side) where I think it is solid aluminum...
  6. Fuel System & Related
    15 gal aluminum cell with sender SOLD 15 gallon RCI or Jaz fuel cell - 0-90 ohm sending unit - built in rollover valve - mounting tabs no dents or damage Looking for a local buyer. $100.
  7. Windsor Engine Parts
    I bought it New from Summit and has been sitting in the box since but no longer need it.. $60 shipped Summit Racing® Alternator Brackets SUM-420104 - Free Shipping on Orders Over $99 at Summit Racing
  8. Windsor Engine Parts
    SOLD SOLD SOLD SOLD 1 pair AFR 165s with fresh valve job and Viton seals Fresh Competition valve job 16 new Viton seals Accepts pedestal mount rockers 60 cc chambers Single spring with damper On running engine for approximately 15,000 miles before refresh Emissions compatible, but all four...
  9. Fuel System & Related
    I am selling my sct ba2400 maf mass air. It has an aluminum housing and brand new filter. It is in perfect working condition. I am asking $160 shipped. Paypal fees not included.
  10. Windsor Engine Parts
    Helping my buddy sell his block he picked up. Was going to build up the car but other life priorities took over so he's selling off his go fast parts. Dart Ford 8.2 Deck SBF Aluminum Block -4.030 Bore -Wet Sump -Std SBF Main Size -Std SBF Cam Size -Std SBF Cam Height -Will accept factory style...
  11. Drivetrain Parts
    Spec Billet SOLD! 96-04 V8 Clutch Fork, missing the little bolt on counter weight, $23 SHIPPED
  12. Drivetrain Parts
    Spec Billet Aluminum SOLD! Tremec Aluminum Bellhousing SOLD! 96-98 V8 Manual Pedal Assembly SOLD! 96-04 V8 Clutch Fork, missing the little bolt on counter weight, $23 SHIPPED
  13. Drivetrain Parts
    I have a used ford Motorsport aluminum driveshaft -175$, 94 gt. T5 with Steeda triax shifter-600$ (prefer not to ship), xtd eBay clutch brand new in the box 10spline for t5-135shipped. Everything is located in 31301 and easier contact method would be to text 9123182581 for pictures too.
  14. Drivetrain Parts
    I'm selling a Spec Stage 1 clutch and aluminum flywheel for the late 01-04 Mustang GT, 03-04 Mach 1, and 99-04 Cobra which in other terms means the kit is compatible with T-45, TR3650, and T-56 transmissions. I bought it with the intent of using it as a replacement for my stock clutch, but...
  15. The Body Shop
    So a buddy of mine has a 2010 GT500 hood, that he was going to fix up and put on his 2013 mustang, but long story short he has to get rid of his mustang so he asked if I wanted the hood for $100. To me the damage doesn't look too terrible, but I don't work at a body shop either.
  16. Windsor Engine Parts
    For sale a set of twisted wedge heads, they were used for about 2500 to 2800 miles and taken out to upgrade, they are disassembled but come with all the parts, valves, springs, this are the numbers the have stamped on TFS-SBF-1 64831-2 These are the ones you can port or extrude the heck out of...
  17. Windsor Engine Parts
    I'm about to buy a new set of afr 205's (72cc) for my 408 build, thought Id check to see if there was anyone selling a set, or something similar, first. Post or send me a pm. Thanks! Heath
1-20 of 65 Results
Top