Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 40 Results
  1. Windsor Engine Parts
    Holley air cleaner, used on my super vic/fast 4150 combo. Will fit perfectly on top of a 4150 or 4160 throttle body/carb ($130 new)- $70
  2. S197 and Coyote Parts
    I really just need the snorkel part that connects between the grille and the main box. But I'll buy the entire box as long as that piece is included. Thanks! JB.
  3. Fuel System & Related
    SOLD: 76mm C&L MAF for 24lb injectors stroked the motor and went bigger. I take care of my stuff and this MAF looks great and works just fine. Regularly cleaned, carefully, with electronics spray. According to Pro-M, you can safely make 650hp with this diameter MAF. Combine it with the...
  4. Fuel System & Related
    Nice used C&L cast intake tube. Boss is drilled and tapped 1/16npt for nitrous nozzle, just screw in a plug if you don't need the hole. $55 shipped
  5. Fuel System & Related
    Ford Motorsports 70mm plastic mass air sensor calibrated for 30lb injectors for Fox mustangs. This is a hard to find piece, so I'll explain what it is. Ford Part M-12B579-A70 Came on 1993 cobras, and was later sold by Ford SVO division as aftermarket. It has a fox body electrical connecter, so...
  6. Electronics and Entertainment
    For sale is a like new low miles (100) wide band Part # 3844 $118 shipped Contact 6305818790
  7. Interior Parts
    Black Driver Side Cobra Airbag SOLD! Black Passenger Airbag SOLD! Airbag Module Assembly out of a 1996 Cobra. Fits 96-98's and could also fit 94-95's as most of this stuff is interchangeable, but Im not sure. Part number F6ZF-14B215-BA. $26 SHIPPED
  8. General Mustang Tech
    Came with a bunch of stuff from a friend of mine, he had it marked Pro M, but the little bracket has a C-108 on it (which could have come from another maf entirely I suppose), and it's missing electronics so I assumed it might be a C&L, but the big flange filter setup is throwing me off. I need...
  9. Exterior Parts
    Need gone. New its around $450. Never used. Bought new a long long time ago. Best offer. Looking for roll cage main loop to fit 88 hatch. Will post pics soon. 848-210-7714 for pic
  10. Miscellaneous Mustang Parts
    Sorry, I deleted this to comply with the forum rules.
  11. S197 and Coyote Parts
    C&L Cold Air Intake for 2005-2009 Mustang GT. Comes with washable performance air filter. $200 (free shipping).
  12. General Mustang Tech
    Hey guys, A coworker/friend of mine has an '02 V6 that recently started blowing hot air. Below is what happened, and what has been done: 1. During heavy rains, he hit a deep puddle on the right side of the street. It was near a drain, so presumably the passenger side of the vehicle was hit...
  13. S197 and Coyote Parts
    Selling my factory CAI with stock filter. Make me an offer??
  14. GT & SOHC
    So I have a cold air intake with a previous rip (which was partially fixed by the previous owner). I was wondering If I could remove the tube that runs from the intake and relays metered air to the driver side valve cover, patch up the hole on the blue silicone connector, and install a breather...
  15. Fuel System & Related
    C&L MAF Housing SOLD! Fox MAF Bracket, $11 SHIPPED
  16. Windsor Engine Parts
    Started new thread for rockers & lower intake
  17. Exterior Parts
    For sale is a Cervini's Ram Air hood for Fox mustangs 87'-93' with 1.5" rise cowl. I removed this from my mustang and replaced it with a heat extractor hood for road racing. Brand new this hood goes for $594 plus freight shipping, plus block sanding/prep at the body shop. Asking price is $500...
1-20 of 40 Results