Ford Mustang Forums banner
adapter

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. General Mustang Tech
    Hello All, I am installing a MSD Tach Adaper #8920 into my 1983 fox body that has the original tachometer. This will be hooked up to the MSD 6AL Ignition box. The tach wire that comes off the 6AL ignition box would only make my tach vibrate? So I bought the Adapter but it gives two sets of...
  2. Electronics and Entertainment
    MSD Tach Adapters off of 96 Cobra, part number 8912, works on 96-98 modular cars and possibly other years as well. Previous owner had an MSD Dis-4 Box on the car. $35 SHIPPED for the pair Motorcraft Coils SOLD!
  3. Fuel System & Related
    These adapters are for 14mm o-ring size (domestic) injectors and add 1” to the overall length, so they convert a short injector (2” OAL) to a long injector (3” OAL). 8 black anodized extensions, 8 clips, and 16 o-rings, new, $75 shipped. [/URL][/IMG]
  4. Fuel System & Related
    I have a few specialty fittings for sale. I will sell them all as a packaged deal for $50 shipped. The first fitting has a -10 AN male ORB (o-ring) on one end and the same type fitting that is on the stock fuel hat, so you can run an aftermarket fuel hat with the stock feed line. $25 shipped...
  5. Fuel System & Related
    GONE!! Found these in the garage. Bought the parts years ago and ended up never using them. Russell PN 640870, adapts the return line on Fox fuel rails (and maybe '94/95?) to a -6AN line. Also included is a straight Russell -6AN hose end, like so. Free to whoever replies to this thread first...
  6. S197 and Coyote Parts
    This is a used BlitzSafe Can M-Link 2 adapter. WTF does that mean? It means you can listen to and control your iPod / iPhone / iPad / iWhatever through your stock 05-06 Mustang stereo. Relatively easy to install (took me 2 hours, but I was drinking (kidding) (not kidding)). It kicks ***. Buy it...
  7. Fuel System & Related
    Brand new Weiand 4150 to 4500 Dominator flange adapter. Costs $105.99 plus handling from Summit. http://www.summitracing.com/parts/WND-7539 Buy this brand new one for $75 including shipping (to the lower 48 states) Thanks, Scott Russell (731)695-0438 - cell
  8. Electronics and Entertainment
    Plate, bolts, and air filter to connect directly to MAF- $20 or $25 shipped. The flange itself runs about $35 new and a filter new about another $25. Its an extra that I dont need. PM Me for contact info.
  9. Modular Engine Parts
    THIS IS THE PLATE THAT ALLOWS THE EATON TO BOLT UP TO THE LOWER MANIFOLD BASICALLY A SPACER PLATE THAT THE INTERCOOLER BOLTS TO AS WELL. IT COMES WITH INTERCOOLER BOLTS AND A GASKET MAKE OFFER THX.
1-11 of 11 Results
Top