I'm selling an Auburn Pro Series 8.8" limited-slip differential for 31-spline axle shafts (Ford Racing part number M-4204-P31) with Richmond installation kit (83-1043-1)
The bearings have already been pressed onto the differential.
I bought this new in 2003 for an 88 couple build but that...
Out of a 88 5.0.... 373, Strange 31 spine axels, spool, c clip eliminators,billet differential cover w/girdle, long studs, newer brakes.... upper and lower tubular a arms, kyb shocks, ford motor sport springs (not pictured).. located in griffith indiana (complete take out Ready to bolt in)
I have a set of brand new in the box 31 spline axles for a 8.8 rear. Made by Ten Factory. Comes with new seals, bearings and axle studs. They fit 8.8 rears in 1994-98 Mustangs. New they cost me $261....my lost your gain...I'll let them go for $200! PM me or call/text me at 3013953921.
Need help identifying what type of rear end this is in the picture. It's installed on a 1966 mustang with RideTech coil-over system. Based on diff cover all I can come up with is Dana 44 or 60...but that would be pretty strange in a mustang.
Selling an 8.8 Rear out of my 87 Mustang. It has 3.73's and is drum to drum including brake lines. 4-lug and ran fine when I took it out. Priced to sell $175 obo. Pick up only, and located in Lancaster PA. PM for pictures and I will get back to you asap.
Or trade for newish...
Built Ford fox body 8.8. 5 lug Moser 31 spline C-clip eliminator axles with 3" studs, Ford Trac-loc differential, Richmond Gear 4.10, braced housing. New drums and wheel cylinders, shoes in good shape, could use a new hardware kit.
Housing was mechanically stripped to bare metal (never really...
Located near St. Louis
Like title says, I have a 8.8 rear axle that was sandblasted and painted black. The rear end has been converted over to 28 spline 5 lug axles. It has been converted to Lincoln disc brakes with new rotors, calipers and brake pads, the rotors have light surface rust from...
I have a Auburn 31 spline diff carrier for a 8.8 rear. It came in a rear that I bought to have shortened and built for track purposes. Both wheels turn evenly and have good posi action. The unit is in great shape. As you can see in the pictures it comes with the bearings already installed. This...
looking for the foxbody version of this: Ford Racing Mustang SVT Rear Axle Assembly M-4001-A373 (05-14 All) - Free Shipping.
dont need brakes, or control arms or anything else. Just a sealed one of these.
If anyone has one in the south florida area let me know how much you want for it.
I took this out of my 89 8.8 because I needed to make the car streetable. I believe it came as a package deal with the axles. The axles are Mosier. I was told when purchased the car it had a Mosier spool, but can't find "Mosier" anywhere on it. You can see in the pictures a P/N.
Brand new in the box Yukon 8.8 duragrip posi for 28spl axles. It has chrome-moly internals and is rebuildable if anything ever goes wrong but does come with a full one year warranty from Yukon. asking 400$ plus shipping located in 31316.
my number is 912-318-2581 for quicker response
Changed the gearing on my car and these have been pretty much collecting dust. Looking to get around $100 for them plus shipping.
these is a ford racing 3.73 ring and pinion set
email me at i991mustang @ aol.com
For Sale is my USED rear-brake kit and c-clip eliminators.
This kit will not utilize your E-Brake, renders it useless. Sorry.
This kit also requires Strange Axles as per stranges website.
This is a nice upgrade for someone with an 8.8. Stops really well.
Both brakes and c-clips...
I have a 8.8 out of a 89 convertible AOD car. I think a 3.08 gear (not sure).
I drove the the with the factory rear end one time and it held the posi nicely. Thats all I know about this rear end. Drum to drum. It still has the quad shocks attached (but they're probably shot.)
I had a built...