Ford Mustang Forums banner

5.8

  1. 5.0/5.8 Engine Tech
    Hey guys i have a 1996 351w and i want to know if i can do a 393 without boring it? To make like a 387? If yes, I bought dms-8723-4000 forged piston for 302 with 1.605 pin height. What i need to do to my block? : 1996 351w Can i only put a 3.85 stroke crank in it with New bearing and New rod...
  2. Mustangs For Sale/Wanted, 1987-1993
    1987 Mustang GT Miles -- 53,166 original miles on body Inspected (everything works) Asking $11,500 Location: Harrisburg, Pennsylvania Call or Text 717-9seven9-zero6two6 Exterior: Dark Gray (Titanium lower accent); Interior - Smoke Gray Cloth Condition: Paint-Good condition; Interior-Very good-no...
  3. 5.0/5.8 Engine Tech
    Hey all, this will be my first ever motor build and I have some noob questions so dont bash please! I am planning on building a 351w efi to put in my fox and I had some questions before I go through with it. Here is my build list so far, please tell me if this is not a good build or parts wont...
  4. Windsor Engine Parts
    5.8 GT40 Lower intake. Will also consider upper, complete set up with throttle body and matching ECM.
  5. 5.0/5.8 Engine Tech
    Hey guys, first post on the forums! I'll get right to it. I picked up a 5.8L windsor from a buddy for cheap and I am planning to drop it into a 1999 Mustang with a t5 5-speed this year. The motor it turns out was rebuilt back in 2009 by Jasper Engines and the only thing they changed in the...
  6. Windsor Engine Parts
    Victor efi intake for sale or trade(SOLD) SOLD
  7. Windsor Engine Parts
    I have this brand new, never used other than for display, shine coated Edelbrock Victor Jr. Intake I was going to use on my Drag Racing build. Lower price: $275 shipped to lower 48 I have the intake sitting on the engine, never bolted.
  8. Windsor Engine Parts
    I have for sale a lower off a 351 lightning. It's been extrude honed. For more info and pics visit this link. Asking 475$ shipped and paypaled. http://forums.corral.net/forums/windsor-engine-parts/1832961-gt40-351-lightning-lower-intake.html ***SOLD***
  9. 5.0/5.8 Engine Tech
    Hey guys, so i bought a lightning 5.8 lower for a 351 swap i'm planning and i noticed when i was cleaning it the runners are all smooth and have a polished appearance. It looks like it has faint lines running through it and i think maybe it has been extrude honed. I took a few pictures and was...
  10. Windsor Engine Parts
    SOLD!
  11. 351C/Big Block Engine Tech
    Ok guys I am new to the site and not sure if this is on here so I apologize if I am re-threading something. I have just recently gotten into building a mustang. I got a great deal on a 91 hatchback with the 2.3l engine. I have a 351 cleveland with a c6 transmission already attached to it from...
  12. Windsor Engine Parts
    I have several parts that have been sitting in my garage that either came off of my fox or I just never used.. Several are for a 5.8 swap. I have a Centerforce Billet Steel Flywheel 28.2 oz part #: 700221 the flywheel has some use on it and will need to be resurfaced. List price is $380 brand...
  13. Windsor Engine Parts
    As the title states, complete upper and lower intake made by professional products. It's almost identical to an Edelbrock rpm intake. It's in the satin finish and still in the original box. Paid over $500 but going a different direction. $300 plus shipping Text or call 916-812-425zero
  14. Windsor Engine Parts
    I have a Sportsman 351 shortblock. (roller setup) for sale. This is a Sportsman block (700 HP block) out of the Ford racing catalog with low comp (8.5) pistons and Forged rods. Bored 30 over. It does have a "stock" ford crank. It ran great when pulled. It was in my street car, rarely...
  15. Windsor Engine Parts
    HAVE A 70S 351 BLOCK,SCAT 408 ROTATING ASSEMBLY I BEAM RODS ETC NO PISTONS,NEW RINGS NEW GASKET KIT,AFR 225 HEADS 58CC CHAMBERS TITANIUM RETAINERS ETC,,ALL ARP STUDS,HEAD STUDS,MAIN STUNDS ROD BOLTS ETC,COPER HEAD GASKETS,VICTOR JR AIR GAP INTAKE,PRO BILLET DISTRIBUTER,COMP RETRO FIT ROLLER...
  16. 5.0/5.8 Engine Tech
    Does anyone know if the lower intake coolant tube off a 5.0 will fit the 5.8 lower? any fitment issues? I'm talking about a piece like this: http://cgi.ebay.com/ebaymotors/1987-1993-MUSTANG-LOWER-INTAKE-COOLANT-TUBE-5-0-V8-/370378034198?pt=Motors_Car_Truck_Parts_Accessories&hash=item563c404c16
  17. Windsor Engine Parts
    I have a reman 351w block for sale; has been bored .040 over. Previous owner took heads off and left underneath a covered porch; you will need to spend some time cleaning up the surface rust off the cylinder walls. Block has been torn down to bare bones; I spent time on one cylinder to get rid...
  18. 5.0/5.8 Engine Tech
    I'm looking for a strong efi 5.8/351 from a salvage yard. My first choice was the last Lightning Truck. They are about as difficult to find as the last 5.0 Cobra. My goal: A, efi, commonly found, high HP, roller 5.8, with good pistons and rods. Can anyone direct me to a Donor Vehicle, engine...
  19. Windsor Engine Parts
    Have two sets of factory ford valve covers to fit 94-95 mustang cobras. These fit 5.0/5.8 motor with roller rockers like the factory motors. I had one set powder coated ford blue while the other set was powder coated metallic black/purple. Sell each set for $120. Will try to get pictures later...
Top