Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. Modular Engine Parts
    Hi everyone. I am looking to buy an HPS hardballr intake manifold for the 5.4 2v. I know they are hard to come by but if you've got one or know of one I'd love to buy it. Thanks
    $750 USD
  2. Modular Engine Parts
    Hello everyone I'm looking for a set of intake adapter plates for the 4.6 2v to 5.4 2v . Like the 54110 or mmr ones. Let me know Thanks!
    $300 USD
  3. GT & SOHC
    So out of all of the 2v,3v and 4vs 4.6 and 5.4 which is the easiest to make power
  4. SVT & DOHC
    Questions.... We all know that the m122 supercharger off the GT500 is readily available and super cheap to pick up. Is it possible to pick up a 5.4 navigator engine (Forge the bottom end of course) pick up cams and swap the lower intake and supercharger over to the navigator engine? Then...
  5. Power Adders For Sale
    im selling an entire 5.4 supercharger set up off a 03 lightning. its supercharger, midplate, intercooler, intake, wiring harness, pulley bridge, #10 lower pulley, and PCM it does have injectors as well but its missing a couple. was when i bought it and never got around to getting replacements...
  6. Windsor Engine Parts
    Complete 5.4l EFI motor from an F150 I believe, has all items except dist. cap and wires. Unknown mileage, bought it locally for a 351 build, but then decided on a kit from Woody instead. $350, local sale only, no shipping. Can supply pics if needed
  7. GT & SOHC
    Hey friends! I hope this isn't too long a post, lol. Any input is so greatly appreciated!!!!! I need some tuning suggestions and questions answered with my swap, I have done mad research for months and called many places and always get different answers. My questions are next and if you want...
  8. Modular Engine Parts
    Hello, I have a set of custom cams im thinking of selling to fund other cams. These cams have more duration than cobra cams, however they are a little to small for a 5.4 dohc. They are used, and will come with matching longer valves which are one size oversize to complete the system. Springs...
  9. GT & SOHC
    My engine builder wants to sell me his 5.6 project engine. Give me a estimate on what I should pay for this setup. Thanks in advance. He promises 600hp NA with fully ported heads and nasty cam. All new parts 5.4L Block all machine work & prep completed Big Bore, torque plate honed, both decks...
  10. Mustangs For Sale/Wanted, 1999-2004
    2000 GT 570+rwhp on 17psi(pump gas) Motor: 08 Shelby GT500 Longblock-10k miles Ford GT Supercar Customized Intake Custom Catchcan Setup Single 3in exhaust out the back off the turbo headers Edlebrock Throttle Body Elbow Power Adder: T76 Master Power Turbo Kit Heat Wrapped TurboSmart Electronic...
  11. Mustangs For Sale/Wanted 2005-Present
    Selling a 2012 GT500 showroom condition car has only 1,800 miles on it car is still practically new! Race Red with white stripes and dark charcoal/white stripped Recaro's with the Navigation screen. If interested and want more info call me at 4078838640, Thanks!
  12. SVT & DOHC
    i have some ideas what i have in mind but i would like to hear what you guys think. theres not too many people running with this setup so some extra input would be nice. so im currently running a 5.4 dohc motor with a not for long stock longblock, Boss 302 intake and a couple of other goodies. i...
  13. SVT & DOHC
    hey everyone, im putting pics and progress of my build on here. im putting a 5.4 dohc navigator engine in my 1998 mustang gt 5 speed. im on a tight budget right now so all im going for at the moment is a solid running stock navi engine in my car. early next year will call for bored out .020...
  14. Blog
    I was cruise on high and heard ticking/sqeaky noise. my oil level was at 1/2 so i fill it back up. this is a rebuild forge motor with new rings and new manley11cc pistons(1500miles). this is a 4v motor. 4.6. On a cold start it will tap(1-3sec) and it will go away once oil pressure builds. and it...
  15. Modular Engine Parts
    call/text zack 479-445-2561 also needing intake adaptor to be able to use 4.6 intake on a 5.4 motor if you know anyone that has a set.
  16. Modular Engine Parts
    This intake is clear coated and was only used for mockup purposes. Never ran. Comes with the following: intake, fuel rails, elbow and custom crossover. $1450 shipped If you have any questions, shoot me a Pm or email at [email protected] [/IMG] [/IMG] [/IMG]
  17. Modular Engine Parts
    Navigator 5.4L, 4valve long block (300 horsepower, 355 ft-lb torque in factory trim) $1250. Clean engine. This engine has the massive (and affordable) 4V heads that provide a tremendous improvement in flow and performance compared to stock 2V or 3V heads. I believe it either had around 53k...
1-20 of 31 Results