Ford Mustang Forums banner

408

  1. 5.0/5.8 Engine Tech
    Hey guys. Wondering what I should use for parts for my 410w build. This is what I have so far. I dont want crazy power. Maybe around 500-600whp with boost. Something that will last and not break the bank. I have a 1991 Ford Bronco with a 351w non roller. Im looking to build a 410w as I already...
  2. 5.0/5.8 Engine Tech
    Hey all im beginning to build my motor im turning a 351W to a 408 Stroker motor i want to keep efi, i plan on putting a supercharger at some point in time. if any body can help with suggested to help out id appreciate it. its gonna be going in a 1994/5 if anyone has any tips or issues theyve ran...
  3. Windsor Engine Parts
    ***REDUCED*** 408W FORGED SHORT BLOCK SOLD SOLD SOLD
  4. Windsor Engine Parts
    ***REDUCED*** 408W PART OUT AND SELL OFF 408W part out. All parts are new. We're assembled by builder. Only put the motor in the car for mock up and now parting out the motor and my build. I have a lot of recites and documentation for the parts. Multiple items means better deal. Call or text...
  5. 5.0/5.8 Engine Tech
    I have a 89 GT with no motor or trans. 355 gears, Auburn diff, 33 spline axles & c clip eliminators. I am thinking the extra cubes of a 351 is better than staying with a 302. Plus the 302 typically splits at around 500 hp. So the question is...do I go with a stock or modified stock 351 and call...
  6. Windsor Engine Parts
    408W Stroker ***REDUCED*** Best parts. Built by SS Customs. ***ALL PARTS ARE NEW*** Motor is fresh and never been fired. Have all build documents and recites. Reduced $6750 OBO. Willing to trade and put in cash for a Cessna 152/172 airplane. 408 for sale. All new engine AFR 205 outlaw...
  7. Windsor Engine Parts
    For Sale- Engine has VERY little use since fresh. 100% professional built by Motor City Speed. 408cid SBF, 9.5 deck Ford Motorsport Block (A351, with girdle) Victor Jr. Heads (extensive professional porting, milled) Comp Cams custom solid roller and roller rockers with girdles Super Victor...
  8. 5.0/5.8 Engine Tech
    i just picked up a 1971 351 w for my 87 notch,my plans are to stroke it,this will be my first engine build from the ground up,seeing i bought my car basicly built just had to finish and add a few things,back to my post,i want to build this windsor up i would like to hit the 500 hp mark if...
  9. 94/95 Tech
    Anyone on here have any experience turboing a sn95 with a 5.8 swap? I have looked at the on3 kits online for the 5.0 but doubt that the turbo is big enough to get me over the 700hp mark. Not to mention the fitment issues with the kit being for a 302. Also, will I need a tubular K member for...
  10. 5.0/5.8 Engine Tech
    Currently my 351w makes around 400rwhp through an auto. Thinking about stroking it to a 408 or possibly larger. How much is there to gain from say going to a 427 from my current 351? Id like to gain 50-60hp and go a half second faster in the 1/4. I just havent been able to find anyone to give me...
  11. Power Adders For Sale
    hot side turbo kit MUSTANG V8 T6 T88 Race GT LX | eBay kit includes pass header, crossover with flex joint, drivers header, and Ypipe. made 750 rear wheel hp at 15 psi on my 351/AOD combo. Street car ran 10.0 @ 142mph drove it to the track and home with this kit. Kit should fit 302 with the...
  12. Windsor Engine Parts
    Cola 4340 4" stroke crank 3"main 2.100" rod journal This is a very nice crank it has never been hurt and has bull nosed and polished counter weights. It is standard on the mains and on the rods. I will throw in a set of brand new King hp main bearings that I just got $750 Total seal rings for...
  13. Windsor Engine Parts
    HAVE A 70S 351 BLOCK,SCAT 408 ROTATING ASSEMBLY I BEAM RODS ETC NO PISTONS,NEW RINGS NEW GASKET KIT,AFR 225 HEADS 58CC CHAMBERS TITANIUM RETAINERS ETC,,ALL ARP STUDS,HEAD STUDS,MAIN STUNDS ROD BOLTS ETC,COPER HEAD GASKETS,VICTOR JR AIR GAP INTAKE,PRO BILLET DISTRIBUTER,COMP RETRO FIT ROLLER...
  14. Windsor Engine Parts
    HAVE A 70S 351 BLOCK,SCAT 408 ROTATING ASSEMBLY I BEAM RODS ETC NO PISTONS,NEW RINGS NEW GASKET KIT,AFR 225 HEADS 58CC CHAMBERS TITANIUM RETAINERS ETC,,ALL ARP STUDS,HEAD STUDS,MAIN STUNDS ROD BOLTS ETC,COPER HEAD GASKETS,VICTOR JR AIR GAP INTAKE,PRO BILLET DISTRIBUTER,COMP RETRO FIT ROLLER...
  15. Mustangs For Sale/Wanted, 1999-2004
    i am pretty interested in a 408/351 (prefer 408) stang, and have learned with my current car that is is cheaper to buy one that is already done, than to build it yourself. pretty much what i want is: interior must be at least decent (prefer v6/gts interior with manual windows etc) the exterior...
  16. Mustangs For Sale/Wanted, 1994-1998
    i am pretty interested in a 408/351 (prefer 408) stang, and have learned with my current car that is is cheaper to buy one that is already done, than to build it yourself. pretty much what i want is: interior must be at least decent (prefer v6/gts interior with manual windows etc) the...
  17. 5.0/5.8 Engine Tech
    I would like to start a 408-sn95 project but i would like to clear a couple things up first. What I know is that i need: Oil pan Cowl hood (would a 4" cobra r work?) Tranny (i plan for 600hp) Radiator Upper/Carb & Lower Lower steel motor mounts, -this is all i can think of..may be leaving...
  18. Mustangs For Sale/Wanted, 1979-1986
    Howdy, I think I'm ready to roll on a Mustang and I'm looking for a turn key monster. I just don't have the time or the skill to build a car and I'm looking for someone who wants to move on to their next project. I'm specifically looking for Manual cars only Lots of attention paid to...
  19. 96 S351 #13

    96 S351 #13

  20. 5.0/5.8 Engine Tech
    question #1. Do I have these Ebay mounts on right or are they backwards? Seems like the post/stud would fit better if it we in the back cause the engine hoist is all the way up to the bumper and I need 2 more inches of travel.... That never hapened to me before. Question #2. I have MAC...
Top