Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 165 Results
  1. Windsor Engine Parts
    9.5 deck 351w EFI setup Everything is sold thanks. located in Danbury CT. Prices including shipping to the continental US. Edelbrock 3849 unused intake elbow 95mm opening...$SOLD Delphi 42lb injectors $SOLD Edelbrock 29245 intake $SOLD Aluminum rails & regulator $SOLD MSD distributor...$SOLD...
  2. General Mustang Tech
    So i just got my 351w dropped into a notch coupe that came with a built c4 (shifter, bands, clutches and aftermarket servos). I have been breaking in the motor and enjoying the crisp shifts and the tranny worked fine. Then the other day i got on it hard while rolling and after that it stopped...
  3. Windsor Engine Parts
    HOOKER 6228 351W SWAP HEADERS - LONGTUBE - 2" Primary with adaptor plates/ bolts and 3.5" collector. Serious headers for high rpm or biggere inch Windsors. They have the usual Hooker Surface rust... Drivers side header bottomed out some so one of the primarys is dimpled but nothing to...
  4. Windsor Engine Parts
    I have a used set (8) pistons for a 408w stroker. With my stroker setup, I couldn't get the quench I wanted so my machinist recommended I get different ones. Probe 12357-030 SRS pistons. They are flat top with valve reliefs. come with wrist pins and locks. 12357 - Ford 408/427W -4.0cc Flat...
  5. Windsor Engine Parts
    LOWERED PRICES! 351W EFI Motor Part-Out I'm selling my complete 351w EFI package. SOLD SOLD SOLD - Edelbrock 351w Performer RPM EFI Intake -SOLD SOLD SOLD 95' 351w Roller Short Block- Well used but in good usable shape, never raced. All clearances are factory. 400.00 pick up only CNC Power...
  6. Windsor Engine Parts
    FMS 351w FOXBODY SWAP PAN - Used but in perfectly usable condition. No dents, no rust. Includes the pick-up and can include stock style oil pan gaskets if you want. 125 Shipped
  7. 5.0/5.8 Engine Tech
    Alright, so this is my first post, but I definitely need help. I bought a 95 mustang with a 351w swap done to it already. I rebuilt the motor this past winter after having it machined. It is now a 395, with forged rods, pistons, and cast steel crank. I replaced the high volume oil pump as well...
  8. Windsor Engine Parts
    SOLD - SOLD - SOLD SOLD SOLD SOLD 351W EDELBROCK PERFORMER RPM EFI. SOLD SOLD SOLD
  9. Mustangs For Sale/Wanted 1978 and older
    https://www.facebook.com/1965FORDMUSTANGFORSALE?ref=hl
  10. Windsor Engine Parts
    All parts listed are in excellent working condition and fit a foxbody mustang. 5. Ford Motorsport 5 quart 351w swap oil pan. This pan also swaps a 351w into a foxbody but looks like a stock pan. Perfect sleeper and budget pan. $120.00 7. Chrome Cold Air Induction with K&N fender mount filter...
  11. Exhaust Parts
    I'm looking for a set of 351W swap shorty headers to get the 408 in my 82 GT running. Let me know if you have anything for sale. Thanks, Robert
  12. Windsor Engine Parts
    Sitting in the garage and needs to go... Moroso Street/Strip Oil Pans 20520 Wet Sump, Rear Sump, 7 Quart Capacity, 9" Deep Fits: 1979-up Mustang, 1981-'88 Thunderbird & Cougar,1979-'86 Capri and other Ford rear sump applications. Now with billet end seals for greater sealing! Oil Pan, Steel...
  13. Windsor Engine Parts
    J.W. Performance The Wheel Flexplates Part Number: N93002X Ring Gear Tooth Quantity: 164-tooth Engine Balance: External, 28 oz. imbalance Flexplate Material: Steel Safety Rating: SFI 29.1 Notes:External 28 oz. balance. Requires use of 80002-3 crank adapter for GM torque converters...
  14. Windsor Engine Parts
    I have quite a few stock and performance sbf parts for sale. Ford svo 1.72 roller rockers- 180$ 94-98 aluminum driveshaft- 175$ edlebrock low pro valve covers-75$ 94 lightning block with with crank only minor cylinder wall damage above top ringland-300obo picked up used edelbrock...
  15. Windsor Engine Parts
    351W almost- short block I was getting set up for a 351W swap into a Fox-body Mustang, but then my priorities changed. So here is what I have as best I can remember (we are going back quite a few years- the work was done at Simonek when they were still in Paterson): 1971 or 1972 block. The...
  16. 94/95 Tech
    have a '94 cobra i replaced 5.0 with 5.8 back in '96. it has GT-40 lower, Crane compucam 2030, TFS twisted wedge heads, SVO pan and windage tray and all the Cobra takeoffs. long story short I came back from overseas and needed an automatic, SO... out came the 5spd and ECU w/ harness& MAF and...
  17. 5.0/5.8 Engine Tech
    I picked up a completely stock 351w out of a 1992 F-250 with 154K on the clock. The guy I bought it from claims it ran well but as it has already been pulled I have no real proof of that. I am taking my time and building this engine the correct way with few to no cut corners. However, while I'm...
  18. Windsor Engine Parts
    I have a no name, but forged, 351W / 408 SVO crank in excellent condition. 4" Stroke External 28oz balance 2.75" Main Journals 2.10" Rod Journals STD/STD Motor made 675hp at the flywheel with this crank on the dyno. Keeping the timing gear in the picture. $320 Shipped [/URL] [/URL]
  19. Classic Mustangs & Fords
    1968 Fastback 351w Engine rebuild questions I have a few questions about which direction to take my new project. I am purchasing a 1968 fastback from a guy who is abandoning the project. I am looking for suggestion on which way to go for my power train. First I'll give you some background. I...
41-60 of 165 Results
Top