Search Results for ‘351w’

Stage 3 Pro-Comp 190CC Aluminum Heads, 4-Sets of Hardened Pushrods ALL + ACTUAL SHIPPING - Pro-Comp 190cc Aluminum Cylinder Heads #3036 with 2.02 / 1.6 valves. Nice Stage 3 Port Work. Fresh valve job, new comp cams valves. Needs rocker stud holes redrilled and tapped. Unmilled, very low miles...

Hey all im new to the motor building thing Im currently building a mild 351w .030 over but after this i wanna get into a bigger build. Im doing full suspension now but my main question my FAST computer not will not support any boost applications so what computer systems would be ideal for this...

I'm looking to change my water pump to a "standard" clockwise direction pump (this will be for my 408w). I'm running across some conflicting information. Some people are saying just swap the WP with a standard direction pump and its done, others are saying it doesn't work with the timing cover...

SOLD! Thanks Corral!

SOLD

Ok Guys, don't hate me for posting about procomp heads... i got a damaged set with a car i bought and decided to just use them as an experiment on my strip/street 351w project. With that said.. the purpose of this post will be to show you guys how i approached porting them. I'll speak to some...

Hi Corral, I am looking to build a bang for buck windsor to replace my tired 302 in my 94 cobra. Not looking for a track car, just a really fast daily. Affording machining, rotating assemblies, and aluminum heads for a windsor stroker seemed a bit steep. The clevor had come up as a viable...

Hello Corral, I've recently returned from boot camp with the intentions of swapping a 351w into my 94 Cobra. The last time I posted on the subject my budget was the barrier preventing me from reaching my power goals. Since then the budget has risen following the stability of a new income. I...

Hello Corral, I know I've posted on the subject before but have since then returned from basic training and have begun settling at my new station and am finally ready to begin the project. I am looking to keep this engine build somewhat "budget oriented". I use the word "budget" lightly as I...

I searched but didn't quite find the info I Was Looking for. My goal here is to have a driver side Mounted YSi with renegade bracket and a Kurgan Brace on a 10 Rib set up. Im on the fence about AC and/or power steering due to the vehicle being a "street Car". Q: is there a renegade Driver side...

Parting out 87-93 Mustangs!!! 2. 5.0 double hump cross member $20.00. 3. Good condtion 327 gears $60. 4. 93 GT wing $60. 6. Auto meter gauge/pod $60. 7. Mishimoto Radiator And Heater Hose Kit Silicone Black GT/Cobra 1986-1993 $80. 8. 93 GT front brakes, lines, pads, rotors and spindles $125...

for 351W Heads Doing a 351 swap and would like to get rid of my current 5.0 heads. They are Edelbrock Performer RPM heads. I am looking for either TW 170's, AFR 185's, or possibly a set of Vic Jr.'s. Some cash for cushion is also an option if needed. Just trying to exchange parts as smoothly...

Just gathering information while planning my swap from my 302. I currently have a built 5.0, and a stock 351. I've read if I buy a 3.85in stroke crank for the 351, use the 351 rods, and my 302 pistons, I'll be around 396ci? Seems like the best $400 I'll ever spend. Also I plan on using my 302...

Couldn't find any information based on experience not speculation. I currently have headers, turbo, MAF, and blowoff valve. I am trying to piece together the rest. I'm only finding cold sides/intercoolers and crossovers for the 302. From those who have boosted the 351W, where did you get your...

In the midst of a 351W swap into my '92 Notchback. I have the engine and have not yet purchased all of the swap components. Figured I'd see what I could get used for cheaper before I start dumping money. As far as I know I currently am in need of: 351w Swap Oil Pan/Pickup 351w Swap Oil Pan...

I currently have a portion of a single turbo kit. I currently have the turbo, headers, MAF, and blowoff valve. It will be going on a 351W in a '92 notchback. I am in need of: Crossover Cold Side Piping (Flanges and Clamps as well) Intercooler Wastegate Injectors Now the kit pieces I have were...

Hey all, this will be my first ever motor build and I have some noob questions so dont bash please! I am planning on building a 351w efi to put in my fox and I had some questions before I go through with it. Here is my build list so far, please tell me if this is not a good build or parts wont...

+NEW+ MAC 1 3/4 SHORTY 351W SWAP HEADER CERAMIC COATED I bought these new a few months ago and never ended up using them. They are still in plastic and in the original box with bolts. 300 + Shipping text 541-292-3800