Ford Mustang Forums banner

351w

  1. 5.0/5.8 Engine Tech
    Hey guys im building a 387. Do a scat 9000 séries can hold power or im bettet with forged crank. Already bought piston for my 302 so i wanna use them for my 387, they still in package Found those part. Can you tell me if they gonna fit together. They look right for me. Crank 3.85: scat...
  2. Windsor Engine Parts
    SOLD Selling a lower for a 5.8l 351w that’s was pulled from a marine engine. Cast iron so it’s heavier than aluminum, solid and can handle anything you throw at it. Thanks for taking a look...
  3. 5.0/5.8 Engine Tech
    Hey guys i have a 1996 351w and i want to know if i can do a 393 without boring it? To make like a 387? If yes, I bought dms-8723-4000 forged piston for 302 with 1.605 pin height. What i need to do to my block? : 1996 351w Can i only put a 3.85 stroke crank in it with New bearing and New rod...
  4. 5.0/5.8 Engine Tech
    Hey guys. Wondering what I should use for parts for my 410w build. This is what I have so far. I dont want crazy power. Maybe around 500-600whp with boost. Something that will last and not break the bank. I have a 1991 Ford Bronco with a 351w non roller. Im looking to build a 410w as I already...
  5. 5.0/5.8 Engine Tech
    I was wondering if anyone has real work dyno numbers with the 11r series of heads from trick flow on their 351/357w. I’m curious to see what the car is gonna put down once it’s back from paint and I get the drivetrain stuffed in it. Combo is: stock block 351w (.030 over) Stock length forged...
  6. Windsor Engine Parts
    427ci Dart shp 9.5 4.125 Holley elbow Eldebrock lower EFI Holley 83lb injectors Holley Distributor Holley ignition Holley fuel rails Jessel shaft Pro rockers High Ports heads stage 3 ported Diamond Pistons Custom grind cam 4340 Eagle crank PAC springs PAC retainers Liberty Rod w/ARP 2000 bolts...
  7. 5.0/5.8 Engine Tech
    I'll be dropping in a 351W soon into my EFI 88 GT Mustang. I recently purchased an Aeromotive A1000 5.0L Mustang Stealth System AEI-17130 fuel system kit. The tech guy said that whatever intake i choose, it must maintain the angled injectors like the stock 302 or stock 351W intakes. Would you...
  8. Windsor Engine Parts
    Looking for an oil pan to fit 4-bolt dart block 351w Jason
  9. 5.0/5.8 Engine Tech
    Hey guys building a 377w svo 9.5 block bought a shortblock dont know much about it has build sheet but not alot written on it has eagle rods and a ford racing crank. Has venolia inverted dome pistons. Was wondering what size combustion chamber would be the best for boosted application. Want to...
  10. Classic Mustangs & Fords
    Hello All, Does anyone know if you had a 351w in 69-70, what would've been the biggest stroker build possible in that time period? I know now days, with a 69-70 block you can get it out to 427 (most would recommend the 408.) Were these configurations used then or smaller ones? If you...
  11. 5.0/5.8 Engine Tech
    looking into the 351 swap and need advice on some parts. for those of you have done the swap what heads, cam, and intake set ups did you use? looking for decent power gains and idle doesn't make a difference for me just trying to make some good memories with the kiddos. thanks
  12. Windsor Engine Parts
    Stage 3 Pro-Comp 190CC Aluminum Heads, 4-Sets of Hardened Pushrods ALL + ACTUAL SHIPPING - Pro-Comp 190cc Aluminum Cylinder Heads #3036 with 2.02 / 1.6 valves. Nice Stage 3 Port Work. Fresh valve job, new comp cams valves. Needs rocker stud holes redrilled and tapped. Unmilled, very low miles...
  13. 5.0/5.8 Engine Tech
    Hey all im new to the motor building thing Im currently building a mild 351w .030 over but after this i wanna get into a bigger build. Im doing full suspension now but my main question my FAST computer not will not support any boost applications so what computer systems would be ideal for this...
  14. 5.0/5.8 Engine Tech
    I'm looking to change my water pump to a "standard" clockwise direction pump (this will be for my 408w). I'm running across some conflicting information. Some people are saying just swap the WP with a standard direction pump and its done, others are saying it doesn't work with the timing cover...
  15. Windsor Engine Parts
    SOLD! Thanks Corral!
  16. Windsor Engine Parts
    SOLD
  17. 5.0/5.8 Engine Tech
    Ok Guys, don't hate me for posting about procomp heads... i got a damaged set with a car i bought and decided to just use them as an experiment on my strip/street 351w project. With that said.. the purpose of this post will be to show you guys how i approached porting them. I'll speak to some...
  18. 5.0/5.8 Engine Tech
    Hi Corral, I am looking to build a bang for buck windsor to replace my tired 302 in my 94 cobra. Not looking for a track car, just a really fast daily. Affording machining, rotating assemblies, and aluminum heads for a windsor stroker seemed a bit steep. The clevor had come up as a viable...
  19. 5.0/5.8 Engine Tech
    Hello Corral, I've recently returned from boot camp with the intentions of swapping a 351w into my 94 Cobra. The last time I posted on the subject my budget was the barrier preventing me from reaching my power goals. Since then the budget has risen following the stability of a new income. I...
  20. 5.0/5.8 Engine Tech
    Hello Corral, I know I've posted on the subject before but have since then returned from basic training and have begun settling at my new station and am finally ready to begin the project. I am looking to keep this engine build somewhat "budget oriented". I use the word "budget" lightly as I...
Top