Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 80 Results
  1. General Mustang Tech
    Good afternoon yall, I’ve been working on a 351w project for drag and my Gf decided for my bday to buy a part of my MAYBE list on summit specifically being a lightened 3.85in stroke crank, problem is I already bought rod’s and pistons that are stock length and crown height. To avoid making her...
  2. 5.0/5.8 Engine Tech
    I am building a 351w for my foxbody Mustang. I’m using the stock bottom end with AFR 185 enforcer head and keeping it EFI with 30lb injector. I’m using a t-5z trans and have 3.73 rear-end gears. What are some cam recommendations that will increase HP and torque with a good idle and keep the car...
  3. Want to Buy ISO GT40 351 Lower

    Windsor Engine Parts
    Looking for a good 351 lower manifold for my current build. Already have a tubular upper and a 302 lower that I can throw in as part of trade or just buy outright and sell my lower.
  4. 5.0/5.8 Engine Tech
    Hello I’m planning to do a 351 swap on my 1988 foxbody 5.0. What are things I need to know before doing the swap.
  5. Windsor Engine Parts
    Used good intake for 9.5 sbf . Super victor. Willing to ship just let me know…. Price $300
  6. 5.0/5.8 Engine Tech
    I was wondering if anyone could help clear this up for me, ive found a rebuilt 1984-1987 windsor (cant remember the exact year) for $325 and i believe it came out of a truck. When i looked up the hp it says like 180hp. When i looked at a 1970s 351w its over 200hp. I was wanting to buy this...
  7. Mustangs For Sale/Wanted, 1987-1993
    STREET LEGAL CAR HAS RUN ON THE DRAGSTRIP, CIRCLE TRACK, ROAD COURSE AND LAND SPEED RACING. 156 MPH IN THE OHIO MILE. THIS CAR IS PRIMARILY SET UP FOR THE ROAD COURSE. ENGINE: 351W, HERBERT CAM, PORTED C5 HEADS, 1.94” INTAKE VALVES, 1.6” EXHAUST VALVES, ROLLER ROCKERS, STUD GIRDLE...
  8. Mustangs For Sale/Wanted, 1987-1993
    1987 Mustang GT Miles -- 53,166 original miles on body Inspected (everything works) Asking $11,500 Location: Harrisburg, Pennsylvania Call or Text 717-9seven9-zero6two6 Exterior: Dark Gray (Titanium lower accent); Interior - Smoke Gray Cloth Condition: Paint-Good condition; Interior-Very good-no...
  9. Windsor Engine Parts
    SOLD I bought this a while back for my 351w build, but I am going Holley EFI route and bought a Holley Dual Sync distributor. This is brand new in the box, only opened to look at and take pics. Part # 60204a.
  10. Windsor Engine Parts
    Looking to buy a Vic Jr. Or similar intake with rails", TB( 90mm?) and elbow. Let me know what cha got. Thanks.
  11. Windsor Engine Parts
    need to buy forged pistons 4.030 over dished 18cc plus 3.5 stroke 5.956rod and possibly h-beam rods for stock stroke 351w roller block
  12. 5.0/5.8 Engine Tech
    Hey guys, first post on the forums! I'll get right to it. I picked up a 5.8L windsor from a buddy for cheap and I am planning to drop it into a 1999 Mustang with a t5 5-speed this year. The motor it turns out was rebuilt back in 2009 by Jasper Engines and the only thing they changed in the...
  13. Windsor Engine Parts
    Victor efi intake for sale or trade(SOLD) SOLD
  14. Windsor Engine Parts
    Wanted: Sheetmetal intake for a 9.5 351W. Needs to be set up for EFI.
  15. Exhaust Parts
    Like title says. Let me know what ya got. I have adapter plates if I need to use them. But prefer specific headers. I've got 351w in a fox with TFS-R heads, tubular k member and flaming river steering shaft also a c4 trans. So clearance shouldn't be a big issue for some large primary tubes.
  16. 5.0/5.8 Engine Tech
    I have a 89 GT with no motor or trans. 355 gears, Auburn diff, 33 spline axles & c clip eliminators. I am thinking the extra cubes of a 351 is better than staying with a 302. Plus the 302 typically splits at around 500 hp. So the question is...do I go with a stock or modified stock 351 and call...
  17. 5.0/5.8 Engine Tech
    Hey guys, so i bought a lightning 5.8 lower for a 351 swap i'm planning and i noticed when i was cleaning it the runners are all smooth and have a polished appearance. It looks like it has faint lines running through it and i think maybe it has been extrude honed. I took a few pictures and was...
  18. 351C/Big Block Engine Tech
    There's a guy selling a 351c locally. It's already rebuilt and converted to a roller. He has all upgraded parts although I'm not sure specifically (I know that will matter some). He's asking 2500. Is this a good deal or should I have my 1978 351 windsor rebuilt and converted to a roller for...
1-19 of 80 Results
Top