Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 66 Results
  1. 5.0/5.8 Engine Tech
    I have completely rebuilt my 1987 Foxbody Mustang GT with a 331 and Terminator X ECU (updated to the latest firmware) and it absolutely will not start at all and now I'm at a dead end on what to try. Everytime I turn over the engine it starts trying to backfire and when it does backfire, its...
  2. 5.0/5.8 Engine Tech
    Hey everyone, While I was in college a buddy of mine blew up his stock fox and I picked it up for $1500. It has lots of goodies, tubular k member, control arms, baer brakes, etc.. It was too good to pass up. Now I've graduated and its time to get to work. While I was in school working my...
  3. Windsor Engine Parts
    KB Forged Icon Pistons 4.030" Bore Flat Top 331" PN # IC9970-030 Like new condition, but have been out of the box. 1 piston has had rings on it (see picture). Intended for 5.400" rods. These have not been run. $522 new, I'll do $360 shipped. https://www.summitracing.com/parts/uem-ic9970-030/
  4. 5.0/5.8 Engine Tech
    I've got an 86 gt with a AJE k member and a 4r70w transmission. I am currently running BBK shorties and they work fine. But I've had the itch for long tubes recently. Last time I had long tubes(cheap flowtech) the car was stock k member, aod, cooked the stock starter, took hours of painstaking...
  5. 5.0/5.8 Engine Tech
    Hello all, I have a 91 GT full weight, stock suspension with 26x9x15 hoosier slicks in the back at 14 psi on this pass. I am running the wrong torque converter I know, but I am looking for suggestions on what to buy to improve my times and any tips at all, as well as gears. Trans is a 4r70w...
  6. Drag Racing
    Hello all, I have a 91 GT full weight, stock suspension with 26x9x15 hoosier slicks in the back at 14 psi on this pass. I am running the wrong torque converter I know, but I am looking for suggestions on what to buy to improve my times and any tips at all, as well as gears. Trans is a 4r70w...
  7. Windsor Engine Parts
    Selling stock block 331 small block Ford short block +. I'm basically selling the complete long block minus heads and intake. Car made 470 hp/425 ft-lb of torque to thr wheels on a Mustang dyno with Trickflow 11R 190 heads and an Edlebrock Victor intake. You can view the engine running in this...
  8. 5.0/5.8 Engine Tech
    Hello, I used to have an account here but I havent had a fox for a bit and forgot my password... I really need help, I just finished a 331 stroker on my 88 notch ex georgia police interceptor. When I purchased the car it was a 306 with edelbrock performer intake and heads, 24lb injectors with...
  9. Windsor Engine Parts
    Ford 331 A4 Short block engine (1000-HP) Supercharged/Turbo $2900 Selling my Ford Racing A4 4 bolt main 331 small block for that has been freshened up and has been sitting on engine stand ready to drop in. 3.25 stroke and bored 4.060. Has Forged Steel Boss 302 crank, Chevy Crower Rods, Mahle...
  10. 5.0/5.8 Engine Tech
    Hi everyone, I am currently in the middle of building my first stroker motor. I have the block off to the machine shop and I am ordering my kit but I have never driven a 331 stroker nor have I ever been in a 331 stroker. I have been in a 347 stroker and i know they are similar but I don't know...
  11. Miscellaneous Mustang Parts
    Parting out 87-93 Mustangs!!! 2. 5.0 double hump cross member $20.00. 3. Good condtion 327 gears $60. 4. 93 GT wing $60. 6. Auto meter gauge/pod $60. 7. Mishimoto Radiator And Heater Hose Kit Silicone Black GT/Cobra 1986-1993 $80. 8. 93 GT front brakes, lines, pads, rotors and spindles $125...
  12. Windsor Engine Parts
    1000hp+ 331 short block Looking for a 331 stoker short block that is capable of handling 1000hp or more. Will only be running around 750-800 daily driving but will be able to push atleast 1000hp so I want it to be able to handle that power without fault. Would be needing it soon. Will pay for...
  13. 5.0/5.8 Engine Tech
    Engine builder is gathering the parts to put my 331 together, and i can't wait. Here is a list of what we are using. Scat 331 flat top rotating assembly Trick Flow 11r 190 56cc heads street port Lunati 61012 231/239 @.050, .571/.587, 112/108 Vic Jr or Performer RPM have decided yet 650 CFM DP...
  14. Blog
    Looking for anybody who has similar build and results 85 gt 1974 351 heads ported flowed to 351 race port gasket and weiand stealth intake also ported to Match using 1.6 Harland sharp full roller rockers 331 eagle kit with SRP forged pistons 9 8 1 compression shorty headers 1 5/8 flows out tail...
  15. Mustangs For Sale/Wanted, 1987-1993
    1990 mustang gt 5.0 331 stroker 93 cobra body kit-7,999 OBO For Sale: 1990 Mustang GT-7,999 OBO I bought the car 6 years ago and have since had the engine completely rebuilt as well as installed a new 5 speed transmission. All the work that has been done to the car has been within the last...
  16. Windsor Engine Parts
    AFR185 part#1422 price reduced.... I have a pair of AFR185's for sale. I bought a coupe with a 351W in it and got burned by seller. Motor had a roller lifter that had turned and ruined the cam. I just got these out of the machine shop after I had 1 of the heads repaired where the DA that...
  17. 5.0/5.8 Engine Tech
    Hello, I have a 89 lx 5 speed, I've been searching for months and Believe I have a good solid 331 stroker build put together. I would appreciate everyone's input and/or advice on what I've come up with. Scat 331 stoker kit with either flat top or small dome pistons ( +3cc dome), Comp Xr282hr...
  18. Windsor Engine Parts
    For sale is this 331 SBF short block. The components are as follows: Block: Mexican 302 70 model, 2 blolt main, Poured, Girdled. Rotating Ass. Scat Forged Crank, Hbeam rods, arp bolts, Ross Nitrous Pistons-flat tops, King bearings and rings Accessories: JW wheel 157tooth 28oz, Durabond...
  19. Electronics and Entertainment
    hi i got a da1 speed density computer and would like to trade it for a A9L maf computer becouse i baught the wrong one for my car. if anyone is interested in trading let me know, thanks
1-19 of 66 Results
Top