Ford Mustang Forums banner

Search results

1-20 of 500 Results
Advanced Search
  1. Will 05+ wheels On 03 Mach 1

    Wheels and Tires
    Need spacers. How big of a spacers depends on the wheel specs
  2. Mavromont Industries to offer more sizes, 17x6.5, 17x9 & 17x10 Pony wheels!

    Wheels and Tires
    EXcellent. In the market for new wheels and these are on my short list
  3. High flowing mechanic water pump recommendations

    5.0/5.8 Engine Tech
    Guess i'll leave them off. After going through the expense of putting A/C back on, last thing i want to do is restrict how effective it can be
  4. Any pics of foxbody custom interiors

    General Mustang Tech
    Red interior can be made to work. All comes down to the right mix of parts. Adding too much black can actually make it worse. A clean set of seats can make a HUGE difference, especially if you go with black carpet and black headliner. My car was originally red interior, but i swapped it to...
  5. Mavromont Industries to offer more sizes, 17x6.5, 17x9 & 17x10 Pony wheels!

    Wheels and Tires
    Do these clear Brembos by any chance? Also, just to confirm they don’t allow the use of the standard pony center cap?
  6. High flowing mechanic water pump recommendations

    5.0/5.8 Engine Tech
    I had a set of U/D pulleys on the car. Been there 20 years and i never had issues with cooling or charging. Car ran 188* on a mechanical gauge no matter what conditions. Very reliable. However, with new combo, i figured i wanted to go with reliability over every single HP. I'm also...
  7. High flowing mechanic water pump recommendations

    5.0/5.8 Engine Tech
    There’s a lip on the factory pulley. The belt rides up on the front lip of the pulley. 0.050” may not be accurate. I need to measure but accessories are off the motor now
  8. High flowing mechanic water pump recommendations

    5.0/5.8 Engine Tech
    SOmething i just noticed with the Edelbrock pump. Setting up my accessories on my engine and noticed the water pump pulley is set slightly back than the others. Maybe 0.050". Not a big deal, as i can just use a shim, but something that's strange given the price tag of the pump. ANyone else...
  9. Any pics of foxbody custom interiors

    General Mustang Tech
    Recovered a set of 80's VW recaros. Found similar material and recovered the door panel inserts to match. Ordered leather trim from redlinegoods.com and did the shifter, parking bracke, center console lid and door armrests in black leather. I bought a leather trim panel for the dash pad...
  10. Can someone recommend the right springs 92GT.

    General Mustang Tech
    WAAAAY back in the day, i ran the FMS C springs with the MM adjustable height arms. With them on their lowest setting, the stance is fairly even. Ultimately it will depend on the weight of the front end of your car (AL heads vs iron heads, no AC, etc) but i was satisfied with it as i didn't...
  11. Guidance on repainting foxbody interior

    General Mustang Tech
    My interior is all OE black, but when i purchased my LMR cupholder console, i needed to paint it to match. To prep the part, i took a scotch brite pad and scuffed up the surfaces that were to be painted (entire console pretty much). Once i felt i had rubbed every part of it, i washed the part...
  12. smaller alternator pulley

    General Mustang Tech
    Like said, ASP makes a 1 7/8" pulley and i've used one with U/D pulleys for 20 years without issue. However, if you hope on ebay, there's a wide variety of alt pulley sizes to pick from.
  13. Installing ATS Brembos on the 03 Cobra.

    General Mustang Tech
    1993 - 2000 Taurus/Sable/Continental. I purchased Cardone part number 18B4537 for the test fit. The opposite side is 18B4536 I think the poster was referring to the statement about the ATS Brembos being identical to the 00R brembo brakes. We know this isn't the case, but it is something...
  14. Heads With an R On Them

    5.0/5.8 Engine Tech
    E5TE heads had an R cast in that location
  15. Retarding cam 2 degrees, valve event question.

    5.0/5.8 Engine Tech
    My Cam card also uses a (-) to denote a timing event. It's listed as: Exhaust: open 43.0* BBDC, close (-3.0*) ATDC It did confuse me a bit, but i found reference to negative values here https://help.summitracing.com/app/answers/detail/a_id/4700/~/camshaft-duration
  16. Installing ATS Brembos on the 03 Cobra.

    General Mustang Tech
    I do want to try it. It’s more of a personal challenge to myself of “can I do this properly” Part of me does want the look of a nice red Brembo Caliper and the white (or black) lettering for that visual “pop”
  17. One Piece Rear Main Seal Installation

    5.0/5.8 Engine Tech
    With my engine currently on a stand as a long block, I’m trying to figure out how I’d pull that off. Flip over, suspend by the engine mount bolts holes by my hoist, and do all the work as it swings around? Sounds fun
  18. High flowing mechanic water pump recommendations

    5.0/5.8 Engine Tech
    Only Edelbrock and Flowkooler seem to have a upgraded design impeller. Summit seems to have the best pricing on the Edelbrock 8840 pump. $222 plus shipping...
  19. One Piece Rear Main Seal Installation

    5.0/5.8 Engine Tech
    When I did my AOD to T5 swap about 1K miles ago, I changed the RMS. Went with the fel-pro unit. It leaked. Engine is out now, so I will try a sleeve and the appropriate RMS with it. Fingers crossed. My install tool before was a 4" PVC cap
  20. Installing ATS Brembos on the 03 Cobra.

    General Mustang Tech
    Looks like my math is wrong. 8057mm^2 is incorrect. Of course, the new format won't let me edit my mistake. Disregard the above post and lets start over. Lets do a factory 94-98 Cobra setup. 2-piston, 38mm calipers up front, single 38mm rear. Brake bias is 70/30 according to the MM link...
1-20 of 500 Results
Top