Ford Mustang Forums banner

Search results

1-13 of 13 Results
Advanced Search
  1. Iron or Aluminum

    S-197 Mustang (2005-2010)
    Probably a stupid question, but I was wondering if the engine block in my 2005 Mustang 4.6L is iron or Aluminum?
  2. 3.73 Gears

    S-197 Mustang (2005-2010)
    I see your point on going to 4:10's and I probably would have had I not already had the 3.73's just sitting there. That being said I really like the 3.73's they make a huge difference IMO much improved response. Also thanks for the advice on the subframe connectors, my car is street driven so I...
  3. High Temp Numbers on the LR Brake Rotor

    GT & SOHC
    I assume you pulled the pins out of the caliper bracket and cleaned and greased them, as well as cleaned the holes in the bracket itself. If not this could be your problem. If those get stuck it acts just like a stuck caliper because it can't slide back and fourth freely. They should move in...
  4. 05-09 Retro Wood Steering Wheel?

    S-197 Mustang (2005-2010)
    Mike I have not seen this before. Pretty cool though if you're into that
  5. 3.73 Gears

    S-197 Mustang (2005-2010)
    Thanks for the info
  6. For Sale FRPP 50oz Steel Flywheel

    Drivetrain Parts
    ok thank you
  7. For Sale 4.6 aluminum 8 bolt flywheel

    Drivetrain Parts
    will it fit a 05 gt
  8. WTB 8.8 Parts

    Drivetrain Parts
    I have 3.55 gears and Traction LOK diff out of 05 gt 8.8 about 40k mi on them. 31 spline, excellent condition. carrier and pinion bearing still attached
  9. For Sale McLeod Super Street Pro Clutch #75207

    Drivetrain Parts
    does it fit 2005 gt?
  10. For Sale Spec stage 2+ kit corbon/kevlar

    Drivetrain Parts
    Will this fit a 2005 gt
  11. 2005 Mustang Stock 3.55 gears and Traction LOK for sale. 8.8 rear end.

    Drivetrain Parts
    Can also text me at 860-705-2242
  12. 2005 Mustang Stock 3.55 gears and Traction LOK for sale. 8.8 rear end.

    Drivetrain Parts
    Just put 3.73 gears in the car. Car had 40k mi when gears were taken out (last week). Everything is in excellent condition. I always used Mobil 1 synthetic lube. Carrier bearings and pinion bearing are still attached and show no signs of wear. Limited slip worked good too just replaced it...
  13. 3.73 Gears

    S-197 Mustang (2005-2010)
    Had the gears installed by CT Axle and Spindle, did a great job. Everything feels nice and tight and he took pictures of the whole process. Highly recommend them if you live in Mass or CT. Can definitely notice the difference, less shifting required. Now to get through the 500 mi break in so I...
1-13 of 13 Results
Top