Ford Mustang Forums banner

Search results

1-20 of 500 Results
Advanced Search
  1. BATTERY advice

    General Mustang Tech
    REALLY? swap parts, put the stock battery in then
  2. Steeda Oil Separator Filter

    5.0/5.8 Engine Tech
    it doesn't wear out drain it, and leave it alone
  3. A9L in a 1986

    Engine Management Systems
    sure you will have to address the dash interconnection though
  4. 10R80 in fox body

    General Mustang Tech
    lets us know how it works out.
  5. smaller alternator pulley

    General Mustang Tech
    ASP
  6. Idle adjustment on new software

    Pro-M EFI Systems
    awesome now what are the conditions needed for each state this is tuning
  7. Stock Clutch Quadrant

    General Mustang Tech
    the issue arises from heavy clutches the nylon teeth cant take it i was going to have a friend machine an aluminum version but i decided to go hydraulic, best decision ever
  8. ‘94/‘95 Clutch Cable

    94/95 Tech
    Yes that is the way to go or do it twice for twice the money plus tow charge, if you cannot disengage the clutch
  9. Idle adjustment on new software

    Pro-M EFI Systems
    maybe that is what prom is calling the states does not really matter, as it is the same function on the graph you see that PID move from one state to another -1 0 1 2 put the name next to the number
  10. ‘94/‘95 Clutch Cable

    94/95 Tech
    if the cable stretched, you will be able to adjust the quad as said do what you want its your money
  11. rod knock or lifter issue?

    5.0/5.8 Engine Tech
    that is engine teardown territory no quick fix
  12. Idle adjustment on new software

    Pro-M EFI Systems
    444.5 rpms are NOT falling
  13. ‘94/‘95 Clutch Cable

    94/95 Tech
    you should be able to get enough tension to disengage if it stripped it will not hold, is it stripped?
  14. Idle adjustment on new software

    Pro-M EFI Systems
    what are the 4 modes
  15. ‘94/‘95 Clutch Cable

    94/95 Tech
    lifting up on the pedal ADDS MORE SLACK that is how it works, as the clutch wears, you NEED MORE slack your issue is the complete OPPOSITE. you have too much slack try this look at how works, lift the clutch pedal to disengage the arm, at the same time, pull the quad to take up the slack as...
  16. Idle adjustment on new software

    Pro-M EFI Systems
    nice!! look at x=444.5 and on........... and compare with x=439-445.5.........can you see what is happening? list the obvious 4 states of isc states, ie 1=?, 0=?, -1=?, 2=?
  17. Idle adjustment on new software

    Pro-M EFI Systems
    get a better pic or state the color legend, it is impossible to read
  18. Only gas gauge works and lights

    GT & SOHC
    If it is reliable, then yes
  19. 10R80 in fox body

    General Mustang Tech
    Do you plan to use every input for the PCM?
  20. Only gas gauge works and lights

    GT & SOHC
    try bbb industries you should really have your own hardcopy if you plan in keeping the car for some time helm publications make them for ford
1-20 of 500 Results
Top