Ford Mustang Forums banner

Search results

1-20 of 492 Results
Advanced Search
  1. Rear spring retainers

    Road Racing/Auto X
    https://www.pegasusautoracing.com/productselection.asp?Product=1875 i just been too cheap to spend $130 on getting them for something that is only annoying and not a problem lol
  2. Shifter Arms: What do you guys use?

    Road Racing/Auto X
    MGW hands down..i have owned every (non ebay junk) shifter out there!
  3. CONVertIBLE Top / Frame Transfer 1991 Fox

    The Body Shop
    i swapped a entire frame over from a 83 to a 89 and it was pretty simple. looks way easier than the horror stories i see about putting on just the material!
  4. Questions.............smaller front sway bar?

    Road Racing/Auto X
    LIMA (SVO) style motor.. similar weight dist to a V8 i would think. i still have AC , add the weight of turbo and FMIC Power wise approaching 10 seconds with current combo and ironing out the last few tweaks. I built it with a DIS NA block, 2.5 ranger crank. Car has a dual plug head with a...
  5. Questions.............smaller front sway bar?

    Road Racing/Auto X
    If you guys don't mind, ill post my combo as it is similar to others and if Jack doesn't mind, suggesting sway bar changes, if needed 88 Notch 3050#s with me in it MM FLSFC MM HD TA MM PHB MM COP-50 300# up front, 225# out back 4cly K-member, 99 Arms, F4 spindles, poly bushings, X2 BJs Fox 89...
  6. Sell my rim/tire setup or use them?

    Road Racing/Auto X
    what wheels are you using? my combo like that on 8" 99 SVT wheels is at the fender lip
  7. MM HD TA vs reg. TA

    Road Racing/Auto X
    i feel better at night knowing i put the HD version on my 4 banger!
  8. Does MM Panhard Bar Clear Stock SN95 Diff. Cover?

    Road Racing/Auto X
    it will clear any stock stamped steel unit or the lower profile s197 units. its the older mac, trickflow, etc.. that they wont clear. i run a trimmed IRS explorer diff. great for $30
  9. drag/ road race suspension???

    Drag Racing
    PH,TA is what you want. MM has you covered i have a full handling car and first time to track was low 1.6s(turbo 4 banger, no 2step) on radials on the way the suspension sits on the street(full CO w/ F300#R225# springs , PH, TA, all swap bars, bilstein shocks/struts, SN95 cobra brakes yada...
  10. My Custom Front LX Saleen Bumper

    The Body Shop
    do yourself a favor now and box it in..world of difference
  11. My Custom Front LX Saleen Bumper

    The Body Shop
    nice! you really did open up the lower hole...did you just trim or did you really have to modify it ?
  12. Notchback Lip Spoiler

    The Body Shop
    think i might have to make one. anone have official angle and heights?
  13. My latest notch. the V8 killa

    Member Build-Up Projects
    new bumper
  14. My Custom Front LX Saleen Bumper

    The Body Shop
    The lower inlet was wrapped with fiberglass and contours my FMIC. much more cooling already and not 100% sealed yet(going to used thick soft foam to seal more)
  15. My Custom Front LX Saleen Bumper

    The Body Shop
    my new one..used the legit bumper repair stuff...parts smoothed out is a flexible as the rest of the bumper
  16. Drag radials for 16x8?

    Drag Racing
    :) me too but on some 5 lug 16" wheel
  17. possible ET with 124-125mph

    Drag Racing
    10.20s if your setup correct
  18. Gear Whine after TA & PHB install

    Road Racing/Auto X
    normal NVH after loosing all rubber connections and making heim and poly links dont sweat it
  19. My latest notch. the V8 killa

    Member Build-Up Projects
    yea wish i was closer too! street tuning is easy for A/F but to really dial in my cam gear and spark timing, it takes way longer trying to figure out optimal spots! i been running those "thin" bushings in 3 setups for years never and issue..dont sweat it!
  20. Seat mounting

    Road Racing/Auto X
    you have pics of this? thanks! matt
1-20 of 492 Results
Top