Ford Mustang Forums banner

Search results

1-20 of 191 Results
Advanced Search
  1. Best clutch for 500 hp street/strip with slicks?

    General Mustang Tech
    I have killed two Spec Stage 3 Clutches. First one welded itself to the flywheel. Spec hooked me up and repaired it after I mailed it back to them. Never had any problems with clutch slipping. Chatter sucked but I lived with it. Car put down 486 to the rear wheels. Broke the clutch and input...
  2. DRY NOS ONTOP OF A VORTECH!!!!

    Superchargers
    My little 50 shot makes up 6 tenths and 6 1/2 mph
  3. Belt Length 8 inch crank 3.33 V2SQ Foxbody

    Superchargers
    Cool thanks for the responses everyone.
  4. Belt Length 8 inch crank 3.33 V2SQ Foxbody

    Superchargers
    Ordering Belt tomorrow. How many psi increase did you guys see? I have anderson PP
  5. Belt Length 8 inch crank 3.33 V2SQ Foxbody

    Superchargers
    Does anyone know what length Belt to run with a S-trim on Foxbody with 8 inch crank pulley and stock 3.33 blower pulley. Vortech didn't know. Its a 8 rib setup. Thanks for any input
  6. Will Oxygen sensors on Dr Gas X-pipe Clear Lakewood Bellhousing

    General Mustang Tech
    Wondering if anybody has had any clearence issues running shortie headers with a Dr. Gas 2 1/2 X-Pipe and Lakewood Bellhousing. Does the O2 sensors clear the Bell Housing? Thanks
  7. WTB YATES Valve Covers, Valley Pan, Lifters

    Windsor Engine Parts
    Looking for some YATES valve covers, Valley pan, and roller lifters. Thanks
  8. SBF 380ci Yates Headed

    Windsor Engine Parts
    Brand New Man-O-War Block 4 bolt main Billet Splayed Caps 9.2 Deck Height 302 mains 4.185 bore Brand New Sonny Bryant Billet Crankshaft 3.45 stroke 1.88 rod journal Slightly used Lentz Billet Connecting Rods with Karr Rod bolts Brand New set of CP Pistons (10) 13.5:1 compression with small...
  9. Will Basani X-pipe for Shorties clear Lakewood Bellhousing

    General Mustang Tech
    Is anyone running shorty headers with Basani X-pipe NO CATS and a Lakewood Bellhousing? I want to know if the O2 bungs will clear the bell housing. I tried a old Mac and the O2's hit the Bell housing on the passanger side. Did a search and couldnt come up with anything. Thanks in advance
  10. Will 275 Drag radial clear LX tailpipes

    Wheels and Tires
    I am running stock length Moser Axles. Thanks for the help. I will go ahead and mount up the tires and start making them fit. I just didnt want to waste the time or money if they wouldnt clear.
  11. Will 275 Drag radial clear LX tailpipes

    Wheels and Tires
    Did you have to beat on the inside fender? Are you running 15x8's with 5.5 backspacing? Thanks for the reply
  12. Will 275 Drag radial clear LX tailpipes

    Wheels and Tires
    Will a 275 Drag radial clear the tailpipes? I have a set of 15x8 with 5 1/2 inch backspacing that I want to mount them on. My outter fender lip has been rolled. Pretty sure quad shocks will have to come off and BFH hammer to inside. I also have a set of 15 x 10 with 6.5 BS i can try to mount...
  13. LMAF Numbers?

    Superchargers
    I am pegging mine with a 306 and 10lbs of boost. I am seeing 1740Kg/hr and 4.86 volts. I just put a SCT 2400 on mine
  14. FoxBody guys what Meter are you running?

    Superchargers
    What meters are you guys running in your FoxBodys? I am currently running a 90 mm Lightning and pegging it. It his 1650Kg/hr and 4.86 volts. I was thinking about throwing a SCT 2400 on the car until I heard about people running the 05 style meters. The new HPX meter from Professional Mass Air...
  15. What brake line for 2003 calipers on Foxbody

    General Mustang Tech
    I checked the bango bolts for the 2003 Caliper and they are M10X1.50. Does anybody know what the threads are for the 95 Calipers?
  16. What brake line for 2003 calipers on Foxbody

    General Mustang Tech
    The 10th Anniversary Calipers are a 99 and up Cobra upgrade arent they? I know there are some calipers out there with fine/course thread. Somebody has to be running the newer rear calipers
  17. What brake line for 2003 calipers on Foxbody

    General Mustang Tech
    Are you running SN95 calipers on the rear or PBR Calipers?
  18. What brake line for 2003 calipers on Foxbody

    General Mustang Tech
    I have those for the front.. I didnt see any hoses for the rear calipers on their sight. I will double check
  19. What brake line for 2003 calipers on Foxbody

    General Mustang Tech
    I have two adapters part# 5818 that are supposed to adapt my 87-93 foxbody hard line to some soft lines. I need to know if I should run the 95 soft lines on my 2003 calipers or run some other year.
  20. Rear Brake Hardware

    General Mustang Tech
    Thanks for the replys.. I just searched and downloaded the M2300 instructions. I will try giving MPS a call on monday.
1-20 of 191 Results
Top