Ford Mustang Forums banner

Search results

1-20 of 160 Results
Advanced Search
  1. 99 GT Roller For Sale!!!!!

    Mustangs For Sale/Wanted, 1999-2004
    i left u a message please call me i am intrested and only 6 hours away
  2. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    no resonable offer refused must sell soon
  3. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    TTT make me an offer
  4. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    ttt please no low ball offers
  5. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    still for sale
  6. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    ttt
  7. Paxton NOVI 2000 renegade kit

    Power Adders For Sale
    This is a paxton novi 2000 renegade style kit it mounts on the drivers side and has a straight discharge this kit is complete minuse Lower crank pulley $119 from asp mondo bypass valve and inlet tube the brackets i had poweder coated black as well as the discharge pipes i have pictures of...
  8. High compression 2v with detonation

    GT & SOHC
    yea no it runs gret on this tune raced a few modified stock block gts and have a few cars on them i run a xcalibrater
  9. High compression 2v with detonation

    GT & SOHC
    well i wanted to try something different and i tell u what a pain in the ass i am trying the colder plugs and a new tune today with less timing it only does it under load say 4th gear and mid rpm range so i had some timing taken out of tyhe mid range i will let you know thanks for the help guys
  10. High compression 2v with detonation

    GT & SOHC
    thanks for the help guys i orderd some plugs that are a total of 2.5 heat ranges colder then stock and still working on the tuning. it is a stock maf. its a daily driver so i have to run 91 the highest we have in utah
  11. ticking noise in new engine

    GT & SOHC
    Well i just built a new engine in a 03 gt it has flattop pistons 11.5:1 compression , crower stage 2 cams and comp springs and long tube headers the problem is there is a loud ticking noise in valve train i ahve checked all the spring clearences and tapets and everything is tight no loosnes felt...
  12. whats the best 33 spline c clip eliminator package for the money?

    Drag Racing
    i use moser 33 spline axles, spool and eliminators they are awsome i have installed both strange and moser stuff and both good stuff, when installing your eliminators make sure u cut the axle tube straight thats how they leak if they are jagged good luck
  13. where are u guys mounting your dis 4 on cobra

    SVT & DOHC
    ok i just installed a procharger p1 on the car and i mounted both tach adapters on the pass side fender by the tube going to tb and then i made two brackets to mount the dis 4 right on top of the tube where the factory air box is looks awsome and fits great
  14. where are u guys mounting your dis 4 on cobra

    SVT & DOHC
    97 cobra where should i mount the ignition box
  15. Will my T-5 hold up?

    General Mustang Tech
    my stock t5 with 60k on it handled 2 years of 11.0 sec passes launched at 5k with nitrous never had anything happen untilei broke my stock axles the car would pull the fron wheels almost a foot and then i put a c4 in it and sold the trans
  16. fully built c4

    Drivetrain Parts
    ttt someone has to need a c4 i need to get rid of this thing its going cheap almost half of what i have into it
  17. Constant miss dead cylinder

    SVT & DOHC
    run a compression test it is possible that you have a fallower that has came off it is a common problem
  18. poping through intake and hesitation

    5.0/5.8 Engine Tech
    back fireing fromt he intake is a lean condition deffinetly fix the intake leak that will cause a lean condition and check frp
  19. Built 306 complete

    Windsor Engine Parts
    this is a 306 with je pistons, scat rods, stock crank, dss main girdle and windage tray, fully balanced. has ported holley heads and ported systemax intake, anderson n-71 cam, 30 lb injectors, 75 mm tb,1.6 scorpian rockers will sell complete with everything from water pump to powersteering...
  20. what should line pressure be on c4

    General Mustang Tech
    it is a built c4 with all pa stuff but with a transgo manuale valve body conversion in all gears im getting about 210 in revers a little higher is this normal pressure.
1-20 of 160 Results
Top